CF in hitting.

[HungryBear]

Do U include any cf in your hitting procedure? if so, where, how, and how much?

hb

[MizunoJoe]

Do U include any cf in your hitting procedure? if so, where, how, and how much?

hb

There is no cf in pure Hitting. The pivot accumulator, #4, is not used. 4-barrel Hitting uses a right shoulder drive before firing the right triceps, and it can go as deep as you can without uncocking the left wrist before firing the right triceps. If the LW starts unlocking from cf and you fire the right triceps then you will kill the club head lag created by cf. It's theoretically possible to recreate the lag with the right triceps, but not likely, and you will end up pushing a dead shaft through impact.

[Bumpy]

Do U include any cf in your hitting procedure? if so, where, how, and how much?

hb

The left arm is always swinging.

Bumpy

[MizunoJoe]

Forgot who I was responding to, this is a test isn't it?

Any mass, connected to and rotating around an axis will have a CF. The only way to zero CF is to move the axis parallel to the path the mass would travel if not connected. --OR-- (for the sake of brevity)

The left arm is always swinging.

Bumpy

Left arm is moving, but not from pivot power, only from the right triceps. Check out the yellow book - Hitting accumulators are 1,2,3. No #4.

[innercityteacher]

Forgot who I was responding to, this is a test isn't it?

Any mass, connected to and rotating around an axis will have a CF. The only way to zero CF is to move the axis parallel to the path the mass would travel if not connected. --OR-- (for the sake of brevity)

The left arm is always swinging.

Bumpy

The "taking out of the slack" and shooting cross-line guarantees CF being present though for me at this point it is more an around CF and less of a down CF for swinging. The CF is present in the straight left arm having been stretched with Extensor Action.

http://youtu.be/c3C1__L5usM

http://youtu.be/1y2fH0ooCoQ


ICT

[MizunoJoe]

The "taking out of the slack" and shooting cross-line guarantees CF being present though for me at this point it is more an around CF and less of a down CF for swinging. The CF is present in the straight left arm having been stretched with Extensor Action.

http://youtu.be/c3C1__L5usM

http://youtu.be/1y2fH0ooCoQ


ICT

Then please explain why 12-1-0, Component #4 is 1/2/3 and not 1/2/3/4. Do you think Homer made a mistake there or perhaps didn't understand?

[Bumpy]

Left arm is moving, but not from pivot power, only from the right triceps. Check out the yellow book - Hitting accumulators are 1,2,3. No #4.

Hitting or Swinging is irrelevant, the left arm swings.


Back to your regularly scheduled program:

Do U include any cf in your hitting procedure? if so, where, how, and how much?
hb

[HungryBear]

Hitting or Swinging is irrelevant, the left arm swings.


Back to your regularly scheduled program:

We have a piece of good ibformation. The left arm swings. with Zero #4 accumulator the arm swings- There is cf.

hb

[MizunoJoe]

We have a piece of good ibformation. The left arm swings. with Zero #4 accumulator the arm swings- There is cf.

hb

That's a piece of garbage, not good info. If the left arm swung in a pure Hiitting pattern, then Power Accumulator #4 would be included for a Hitting pattern, but it is not. The left arm is pushed out of the way by the right triceps, it doesn't swing.

[HungryBear]

That's a piece of garbage, not good info. If the left arm swung in a pure Hiitting pattern, then Power Accumulator #4 would be included for a Hitting pattern, but it is not. The left arm is pushed out of the way by the right triceps, it doesn't swing.

Swung is swung

Hb