snap release how I changed my random sweep to snap
Emergency Room - Swingers
|

01-05-2014, 11:43 PM
|
 |
Member
|
|
Join Date: Jun 2012
Location: Near a golf course...no, beside a golf course...
Posts: 51
|
|
Originally Posted by whip
|
|
snap release make ball go far
|
I don't know what to call it, whether Snap or Random Sweep, but pretty much the intents described by MJ to achieve true Snap Release with CH speed is IMO most powerful.
But I believe the intents Daryl described to achieve Snap Release is not as powerful as MJ's version but is IMO the best combo of accuracy and power.
But I'm thinking...maybe MJ's version should be our intent, but feel of what happens is Daryl's version. So we're all correct...hehe
|
|

01-06-2014, 03:03 PM
|
|
Senior Member
|
|
Join Date: Jan 2005
Posts: 719
|
|
Originally Posted by Daryl
|
There is much more to the Straight Line Delivery Path than the Curved Path of the Hands argument. It's a "Turned Shoulder Plane", 3 Stage Downstroke Acceleration procedure. As opposed to the Elbow Planes 2 Stage Acceleration procedure.
On the simplest level, it means that the Hands are traveling a Straight Plane and not Shifting Planes.
On a more complex level, it's the Power Package Shift from Right To Left, Down Plane, without Straightening the Right Arm. During this Shift, Hand Acceleration, the Power Package maintains the Same Alignment as it assembled at the End of the Backstroke.
Let me ask a question:
Can you have a "Snap Release" if the Ball is located in the Center of your Stance?
|
This as a new one on me, and is certainly not indicated by the photos 10-19-B #1 & #2, which suggest a straight line. However, that would clear up a lot of confusion among TGMers.
Certainly, like this at :40
|
|

01-06-2014, 03:06 PM
|
|
Senior Member
|
|
Join Date: Jan 2005
Posts: 719
|
|
Originally Posted by whip
|
|
snap release make ball go far
|
Right on! And especially to get good distance with the short irons. 
|
|

01-06-2014, 03:34 PM
|
|
Senior Member
|
|
Join Date: Jan 2005
Posts: 719
|
|
Originally Posted by svsvincenzo
|
Ok. Let me ask this please...the TGM definitions of snap vs random sweep release refer to reality, correct? Meaning what's actually happening? So intent is I material as far as definitions are concerned?
So MJ and Daryl are talking about the HOW to achieve these realities--snap vs random sweep?
So MJ you're saying Snap Release with max potential CH speed is only possible by keeping PP3 with R shoulder speed and R elbow bent? How about aligning the shaft with the shoulder rotation (plane where shoulder rotates) from Startdown to Downstroke, so you have only longitudinal acceleration on the shaft, hence no Release/PA2 uncocking/keep angles without tensioning the wrists? At Release just fire PP3/PA1? Wouldn't that be Snap Release without tensioning the wrists? MJ?
IMO I'd agree more with Daryl. What I said above jives with the last 2 posts of Dsryl...I think. Daryl?
|
Yes, TGM deals with reality, when HK is talking feelings or intentions, he says so, like when he says the swing should feel heavy, not fast or dainty.
I'm talking about using the Pivot ONLY to uncock the left wrist from a deep release position. The hand path to that deep release position depends on whether you plane shift on the downswing or not. In either case it's the hips which bring the hands down to that deep release position, but from there, there is no firing of PA#1, which would be a max trigger delay Hitting procedure if the Pivot is stalled or a Switting pattern without Pivot stall, which, in either case, for most golfers would be inferior to the cf Swing.
|
|

01-08-2014, 06:18 AM
|
|
Senior Member
|
|
Join Date: Sep 2009
Posts: 650
|
|
Originally Posted by MizunoJoe
|
Yes, TGM deals with reality, when HK is talking feelings or intentions, he says so, like when he says the swing should feel heavy, not fast or dainty.
I'm talking about using the Pivot ONLY to uncock the left wrist from a deep release position. The hand path to that deep release position depends on whether you plane shift on the downswing or not. In either case it's the hips which bring the hands down to that deep release position, but from there, there is no firing of PA#1, which would be a max trigger delay Hitting procedure if the Pivot is stalled or a Switting pattern without Pivot stall, which, in either case, for most golfers would be inferior to the cf Swing.
|
nice....look at my avatar, that's hogan doing what mj is describing, the hips pulling the hands down deep into release all the way through the shot!

Last edited by whip : 01-08-2014 at 10:12 AM.
|
|

01-08-2014, 10:57 AM
|
 |
Senior Member
|
|
Join Date: Feb 2005
Location: Illinois
Posts: 3,521
|
|
Originally Posted by whip
|
nice....look at my avatar, that's hogan doing what mj is describing, the hips pulling the hands down deep into release all the way through the shot!
|
Hogan forgot the Right Shoulder.
How exactly does the Pivot move the Hands without moving the shoulders?
__________________
Daryl
|
|

01-09-2014, 07:36 AM
|
|
Senior Member
|
|
Join Date: Sep 2009
Posts: 650
|
|
|
The change from random to snap was just more to see if I could do it but really the power difference is very minimal not enough to make much difference for me.
|
|

01-18-2014, 02:45 AM
|
 |
Member
|
|
Join Date: Jun 2012
Location: Near a golf course...no, beside a golf course...
Posts: 51
|
|
Originally Posted by MizunoJoe
|
Yes, TGM deals with reality, when HK is talking feelings or intentions, he says so, like when he says the swing should feel heavy, not fast or dainty.
I'm talking about using the Pivot ONLY to uncock the left wrist from a deep release position. The hand path to that deep release position depends on whether you plane shift on the downswing or not. In either case it's the hips which bring the hands down to that deep release position, but from there, there is no firing of PA#1, which would be a max trigger delay Hitting procedure if the Pivot is stalled or a Switting pattern without Pivot stall, which, in either case, for most golfers would be inferior to the cf Swing.
|
Thanks MJ. Agree with the hips there.
But why is use of PA1 (whether hitting or switting) inferior to CF swing (swinging), especially the switting?
Use of PA1 IMO stabilizes the Sweetspot hence keeps it squarer longer (more like AH wrist action without intending it, I'd like describing it a HH action but looooong HH action). Plus you got to use the R arm, pec and wrist. But I'm talking switting where no pivot stall, which is what's hard at least for me.
|
|

01-18-2014, 02:46 AM
|
 |
Member
|
|
Join Date: Jun 2012
Location: Near a golf course...no, beside a golf course...
Posts: 51
|
|
Originally Posted by Daryl
|
Hogan forgot the Right Shoulder.
How exactly does the Pivot move the Hands without moving the shoulders?
|
I agree. But do we have to think about the R shoulder while using those hips?
|
|

01-18-2014, 12:54 PM
|
|
Senior Member
|
|
Join Date: Nov 2008
Posts: 759
|
|
Originally Posted by Daryl
|
Hogan forgot the Right Shoulder.
How exactly does the Pivot move the Hands without moving the shoulders?
|
I don't follow that. In the avitar. Hogan has turned the hips and tilted. The hips are now "square, the shoulders are back ~45 deg. from the hips and the hands (power package) are ~45 deg back from the shoulders.
The hands have dropped and the shoulders have moved down and are held back (7-13) to provide best support to the hands.
Nohing has released yet but the loading is now at the point Hogan shows in 5 lessons where the "muscle Man" is present.
Where do you think Hogans shoulders should be at this point?
HB
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 07:03 AM.
|
| |