The hands aren't educated until they control the pivot. Control! Not replace or substitute. The hands train or design the pivot- its HIP MOTION -so it can deliver the hands to the ball without bending the plane line.
You want to use the pivot more- go right ahead- it's trained. You want to use the arms more- go right ahead- they're trained. When the mind is in the hands, on the downswing, it is pretty hard for the pivot to be the boss.
So, I presume you all look at Pivot as a BEARING rather then it is a Electric Motor
Now, another related question. I always believe that Hitting the ball further is all about be able to generate more speed.
Now, Pivot is a massive vehicle which transports the Power Package Assembly, therefore if I am correct Pivot is not giving any speed but only the hands are (Endless Belt effect)
So could I have a firm sort of defination about Pivot Power, according to the previous debate, pivot is just a Bearing and have minimum Kinetic Energy. But if we look at it from a different Angle the inside moving the outside. So is the pivot a Electric Motor or It is a Bearing?
Please really give some precise thought to it, rather then just answer the question from the book.
__________________
I am not East Coast nor West Coast... I stick to the MIDLAND
So, I presume you all look at Pivot as a BEARING rather then it is a Electric Motor
Now, another related question. I always believe that Hitting the ball further is all about be able to generate more speed.
Now, Pivot is a massive vehicle which transports the Power Package Assembly, therefore if I am correct Pivot is not giving any speed but only the hands are (Endless Belt effect)
So could I have a firm sort of defination about Pivot Power, according to the previous debate, pivot is just a Bearing and have minimum Kinetic Energy. But if we look at it from a different Angle the inside moving the outside. So is the pivot a Electric Motor or It is a Bearing?
Please really give some precise thought to it, rather then just answer the question from the book.
Pivot without the Hands and Hands without the Pivot is like using a water pistol to hunt for quails (sorry, I could not resist!).
You need to marry the Pivot with the Hands and that is the whole foundation of TGM - Pivot Powered Hand Controlled Pivot.
Too many people do not understand this relationship between the Hands and the Pivot and thus TGM degenerates into a "Hand" camp and a "Pivot" camp.
Think of the Pivot in swinging as a merry-go-round. The faster the merry-go-round spins, the faster your speed when you are "thrown-off"
What are the Pivot components?
They are:
Pivot
Shoulder Turn
Hip Turn
Hip Action
Knee Action
Foot Action
The Shoulders are the farthest (from the center) and the fastest moving components of the pivot and they transmit the motion of the pivot to the arms.
Power is transmitted to the hands and it is not independently generated by the hands.
...the whole foundation of TGM - Pivot Powered Hand Controlled Pivot.
It is true that the Pivot provides Pivot Lag and is also the massive rotor that generates Angular Momentum for Throw Out Action for the Swinger. In that sense, we can view the Pivot as providing power. However, my understanding of Golf Stroke increased when I viewed the main function of the Pivot as Delivery rather than generating power.
Pivot Delivered Hand Controlled Pivot.
So who is responsible for power then?
Edit: after re-reading my post, I could foresee lots of opportunity for misinterpretation. Lets hope not too many will arise, but I will attempt to tackle them when they come.
__________________
tongzilla
Last edited by tongzilla : 02-15-2006 at 01:22 PM.
.... we can view the Pivot as providing power. However, my understanding of Golf Stroke increased when I viewed the main function of the Pivot as Delivery rather than generating power.
Tong,
Excellent distinction here between the mechanical and the procedural!
Mechanically: The pivot lag/ pivot definitely adds power to the stroke
Procedural Ideal: You don't crudely focus more on the pivot to get more power- that's pivot controlled hands- when you're trying to move the pivot.
Interim Process: This is a common phase- process that one works through to get to a refined golf movement- and it IS A PROCESS- no doubt. So, I'm not saying that at certain times one wouldn't work only on their pivot, pivot lag, etc- they would and you do, but ideally you need to tie that stuff back in with your "intention" of moving the club. And the more you can change the pivot, pivot lag via the intention and hands, i.e. proper loading, pressure point locations, etc, etc. the better.
So on the Procedural stage- focusing on creating power with your pivot- regardless of how good or bad your alignments are- is say the 5 year into the game stage. Moving to more of the perspective that pivot provides delivery, is the 10, to 15, to 20+ year stage of development of your golf swing. All your alignments have to be much better, much more integrated, in order for less effort to provide the proper power. At the 5 year stage you need that pivot effort to overcome - "THE MESS". And then some never understand and never move forward- they never understand how that's not the way to swing it- after all "it doesn't work" or "I don't get any power if I don't focus on the body/pivot!"
Of course, the years used above are just crude examples- showing the principle. Some move through those stages faster than others.
Excellent distinction here between the mechanical and the procedural!
Mechanically: The pivot lag/ pivot definitely adds power to the stroke
Procedural Ideal: You don't crudely focus more on the pivot to get more power- that's pivot controlled hands- when you're trying to move the pivot.
Interim Process: This is a common phase- process that one works through to get to a refined golf movement- and it IS A PROCESS- no doubt. So, I'm not saying that at certain times one wouldn't work only on their pivot, pivot lag, etc- they would and you do, but ideally you need to tie that stuff back in with your "intention" of moving the club. And the more you can change the pivot, pivot lag via the intention and hands, i.e. proper loading, pressure point locations, etc, etc. the better.
So on the Procedural stage- focusing on creating power with your pivot- regardless of how good or bad your alignments are- is say the 5 year into the game stage. Moving to more of the perspective that pivot provides delivery, is the 10, to 15, to 20+ year stage of development of your golf swing. All your alignments have to be much better, much more integrated, in order for less effort to provide the proper power. At the 5 year stage you need that pivot effort to overcome - "THE MESS". And then some never understand and never move forward- they never understand how that's not the way to swing it- after all "it doesn't work" or "I don't get any power if I don't focus on the body/pivot!"
Of course, the years used above are just crude examples- showing the principle. Some move through those stages faster than others.
Thanks Mike. I'm always feeding off you. And you've just made me more hungry!
Your "crude example" may scare some people off -- if I knew it would take me 20+ years before I achieve substantial integration of the Pivot -- I wouldn't have started playing this game!
Lets explore this "if you want to hit the ball further, then you must work harder with your pivot" mentality. As mentioned previously, focusing on the Pivot and its speed/movement/positions leads to a Pivot Controlled Hands procedure. Now the player learns about Hand Controlled Pivot (maybe through reading the book, or learning from an AI or information on forums). So he tries to hit everything with his Hands, without giving any thought to what his Body (Pivot) is doing. After a while, his Stroke may even look quite unorthodox, a very handsy swing with very little movement of the shoulders and hips. A pro or AI notices this and instructs the student to use more Pivot. So the student goes back to a Pivot Controlled Hands procedure, primarily focusing on making a bigger turn, getting the Right Shoulder on Plane, the Hips has turned the correct amount, everything is moving Parallel to the selected Delivery Line etc. After a while (20+ years) the student realises that Hand Controlled Pivot doesn't really mean hitting with the Hands only.
The breakthrough comes when the student learns that it really means hitting with the Hands together with its Lag Pressure Point(s), which is felt in the Hands. So now when the student 'hits with the Hands' his brain just will not allow him do that unless he also feels Lag Pressure in his Hands. But how the heck is he going to get max Lag Pressure? Only by initiating the Downstroke with the lower body (the feet, then the ankles, then the knees, etc.). But the student isn't thinking about all these different components. He's only thinking about his Hands, and even though he is initiating the Downstroke with his Hands, his Hands just won't start down unless it feels the necessary Lag Pressure. And it can only feel this if the Pivot has done its job properly.
Moving on...
I find it surprising (and irritating) that there are some extremely good players using Pivot Controlled Hands. Now, I haven't mastered the art of seeing whether someone is using Pivot Controlled Hands or not, but can you please share your thoughts on who you think some of these players are on Tour?
Tongz
Good post Tongz, plain English, easier for me to understand. both pivot and hands got to be trained.
12PB
Spoke to Comdpa about some drill, and he was recommended chipping with Cross Grip. I was trying it myself, and I can only chip with it. Correct me if I am wrong, Cross Grip will give you a Slice Tendency, and therefore if we are using it as a drill hitting 7 iron, it will help us to learn how to swivel. LEARN TO ROTATE THE CLUB FACE
Obviously some Ai will not require you to do your finish swivel, particular if you are doing angle and vertical hinging shot. Even though if you are a SWINGER, the right arm is just as important. You can swivel the clubface with either hand and not just the left hand. (Left arm always swinging, right arm always driving or SWINGING)
Some pivot Ai will totally disagreed to the above, as they believe that (Once you have your hands educated) the pivot do all the work for you. Yes, but you have to train your hand first.
First learn to hook the ball ( At that stage you might have to work a little bit with the ball position, and it will move the machine back a little bit). Keep training your hands. Our brain is so clever that if you hands is not train ( Not be able to rotate the clubface) The pivot will not help us to move the ball position forward (Rotate).
There are other points will help us to achieve the above, but is rather natural for most TGMers anyway. At address, we try to setup for zero shift, which our left wrist position higher (between uncock and level position), use more of the elbow to lift the club up..
Everyone have different feeling of clubface rotation, some people feel like they are doing it right at the top, and some are later. I think we just have to experiment with it. But certainly what Compda recommend CROSS GRIP CHIPPING is certainly something help to teach our hands to rotate.
__________________
I am not East Coast nor West Coast... I stick to the MIDLAND
Moving on...
I find it surprising (and irritating) that there are some extremely good players using Pivot Controlled Hands. Now, I haven't mastered the art of seeing whether someone is using Pivot Controlled Hands or not, but can you please share your thoughts on who you think some of these players are on Tour?
I'd say that visually, that it could be a little dicey determining if someone was hand controlled pivot or not. You never know what individual or series of movements in one's golf movement they have made automatic. That is you could be priimarily aware of just moving your hands and you may automatically with that thought and awareness have integrated a full shoulder turn with little independent arm motion- looks pivot controlled but is hand controlled.
The basic distinction here is - Are you primarily (not completely)-( i.e. not blocking out the body feel, awareness- or preventing it by not moving it) focusing on where and what the hands are doing- as they tell you what the club is doing, while having the body fully support that movement in both a geometric sense and also a physics sense - or Are you focusing on what the body is doing and the hands and club are somewhere in the background - doing something- who knows exactly. In the Hand Controlled Procedure- you start and stay with the basic concept and then work on having the body movement fully support that- it's a project completed over time. In the Pivot Controlled Procedure- it's a dead end in that - it is what you focus on- it is your procedure- you don't really build on it.
Back to the question- and an answer. You could also have someone that is pivot controlled on the backswing and hand-controlled on the downswing. You could have a player drift in and out of a hand controlled procedure and then not realizing all the issues- drift into a pivot controlled procedure.
With all of that said- Generally speaking or in theory the rofessional golf movements that have the quiet pivots, the supporting pivots, the efficient looking pivots- are hand controlled and the other ones are not. Again, you could have a beginner with a hand controlled pivot- that has a golf movement that is completely ungolf like- that doesn't support the on-plane motion of the club or the hands. Hand control doesn't do anything magically by itself- it's more like the christmas tree- you've got to have it in order to hang ornaments- it's the basic.
I'd say someone like Mark Calcavechia looks like a pivot controlled procedure. But it's not so important who is or who isn't- it all comes down to the most important approach- and that's "WHAT AM I DOING AND IS IT THE BEST THING I CAN DO TO EVENTUALLY SHOOT LOWER SCORES FOR MYSELF!"
So, I presume you all look at Pivot as a BEARING rather then it is a Electric Motor
Now, another related question. I always believe that Hitting the ball further is all about be able to generate more speed.
Now, Pivot is a massive vehicle which transports the Power Package Assembly, therefore if I am correct Pivot is not giving any speed but only the hands are (Endless Belt effect)
So could I have a firm sort of defination about Pivot Power, according to the previous debate, pivot is just a Bearing and have minimum Kinetic Energy. But if we look at it from a different Angle the inside moving the outside. So is the pivot a Electric Motor or It is a Bearing?
Please really give some precise thought to it, rather then just answer the question from the book.
Oz,
I've highlighted the part of your post that I am addressing- Now, another related question. I always believe that Hitting the ball further is all about be able to generate more speed.
I'm not very good with equations and physics - so I might be a duck in hunting season on this one but it's not just speed that's required to hit the ball further. It's the formula for Kinetic Energy that's important- KE=1/2mass x Velocity squared
So the greater the pivot lag the greater the mass is rotating around creating the following two examples where the faster velocity of the clubhead in example two produces a much lower kinetic energy amount - due to the lower mass.
Example 1: 1/2 x 180= 90 x (50 x 50) = 225,000
Example 2: 1/2 x 90 = 45 x (60 x 60) = 162,000
So in the first example you've got less velocity 50 but more mass 180 and a total kinetic energy applied to the ball of 225,000
Second example you've got less mass 90 but an increased velocity of the clubhead of 60 squared, creating a total of kinetic energy applied to the ball of 162,000.
So for a practical example, if you throw the club away on the downswing- it starts to swing around a much shorter radius (left wrist vs the left shoulder) and because of that the speed in mph increases significantly but since you've got little mass in the clubhead itself and you've added nothing to it- the kinetic energy is very low.
I'm sure someone can verify or refute the principle involved here- and maybe even be able to restate the equation with the appropriate unit labels, etc.
Oz- I know this just addresses one issue in your post- you may still have others.
) the student realises that Hand Controlled Pivot doesn't really mean hitting with the Hands only. 
Hybrid Mode
